Guard Bands – Enablers For Co-existence Of Coherent 100G Signals And Non-coherent 10G NRZ Signals

On , in All Posts, General, Line Side, by Tony Goodchild

The coherent 100G transmission systems from network equipment vendors are showing an amazing robustness and tolerance for high PMD and CD. Some are reporting a PMD tolerance of up to 100ps DGD and above, while the CD tolerance can be in the range of up to 50.000ps/nm. Therefore the ideal network for deploying such coherent […]

Tagged with:  

Understanding Polarisation Multiplexing

On , in All Posts, General, Line Side, by Tony Goodchild

Polarisation multiplexing is commonly used in 100Gb/s line side transmission as a method to increase the bit rate over the line without increasing the transmitted symbol rate. Using polarisation controllers it is possible to generate two perpendicular polarised optical signals on the same wavelength for transmission through a single fibre. As two separate signals are […]

Tagged with:  

Understanding Phase Modulation For 100G Transmission

On , in All Posts, General, Line Side, by Tony Goodchild

There are a number of challenges to achieving 100Gb/s optical transmission rates using the technologies that have been deployed at 10Gb/s and even 40Gb/s. Using traditional transmission technologies such as NRZ modulation on the line will result in very poor spectral efficiency and a 100G signal using NRZ would not fit into the standard 50GHz […]

Tagged with:  

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Visit our friends!

A few highly recommended friends...